1 9

HT-6510NT Pen Type Hardness Tester Surface Hardness Meter with 0.75mm Test Head

HT-6510NT Pen Type Hardness Tester Surface Hardness Meter with 0.75mm Test Head

$259.00 USD
$259.00 USD
Alennusmyynti Loppuunmyyty
The spring compression deformation, the force generated by the load on a known diameter of the test head, with the test head to mark the coating surface to be tested to check whether the coating surface is damaged, the test results in Newton.

Features

* The measured surface can be flat or curved.

* Not limited by area size.

* Easy to operate, stable performance.

* Easy to carry and other characteristics.

Specifications

Pressure test spring material Spring steel
Test head material Tungsten carbide
Test head diameter 0.5mm (Opel, optional)
  0.75mm (Bosch, standard)
  1.0mm(optional) (conforming to IS01518 and DEF)
Spring pressure range 0~3N (marked in blue)
  0~10N (marked in red)
  0~20N (yellow mark)
  0~40N (white mark), (optional)

 

Ying

Näytä kaikki tiedot