Impossible de charger la disponibilité du service de retrait
*RANGE： 0~ 6000mm (at steel velocity); range selectable in fixed steps or continuously variable.
*Damping:100,200,400ohm selectable to meet different resolution and sensitivity need.
*DB Step: 0dB, 0.1 dB, 2dB, 6dB step value as well as auto-gain mode
*Power supply: DC 9V; lithium batteries work for 4 to 8 hours or more
*Overall dimensions: 263 × 170 × 61 (mm)
Specifications:
Range: 0 to 6000 mm, at steel velocity Material Velocity: 300 to 15000m/s Display Delay: -20 to 3400 µs Probe Delay/Zero Offset : 0 to 99.99µs Sensitivity Leavings: >60dB (flat-bottomed deep hole 200mm2) Resolution : >40dB (5P14) Noise Level: ≤ 8% Test Modes: Pulse echo, dual element and thru-transmission Pulse Repetition Frequency ranges from 10 Hz to 1000 Hz Pulse Energy: Low, Medium and High spike pulse. Damping: 100, 200, 400 ohms Bandwidth (amplifier bandpass ): 0.2 to 15 MHz Gate Monitors: Two independent gates controllable over entire sweep range Rectification: Positive halfwave, negative halfwave, fullwave, RF System Linear Deviation:Horizontal: +/-0.2% FSW, Vertical: 0.25% FSH, Amplifier Accuracy +/-1 dB. Reject (suppression): 0 to 80% full screen height Units: Inch or millimeter Transducer Connections: BNC or LEMO Power Requirements: AC Mains 100-240 VAC, 50-60 Hz Overall Dimensions: 10.35×6.7×2.4 in Relative Humidity: (20 ~ 95)% RH Power Supply: DC 9V Operating Temperature: -10℃ to 50℃ Storage Temperature: -30℃ to 50℃
MFD350B Standard Configuration Main Body x 1 Straight Beam Probe x 1 Angle Probe x 1 Machine-probe Cable (Q9-Q9) x 1 Battery Module x 1 Power Adapter (Charger) x 1 Support Pillar x 1 English Manual x 1 Instrument Case x 1 Data proceeding Software x 1 USB communication Cable x 1
Extra Transducers and Connection Cables: 1 x 4MHz 10mm Dual Straight Beam Probe F10 Transducer 2 x 45 º Angle Beam Probe Transducer (4MHz 8x9) 2 x 60 º Angle Beam Probe Transducer (4MHz 8x9) 2 x 70 º Angle Beam Probe Transducer (4MHz 8x9) 1 x Connection Cable for angl
