LS211 Ultrasonic Thickness Tester Metallic and Non-metallic Wall Thickness Meter 5MHZφ10 Probe 0.8-600mm

LS211 Ultrasonic thickness tester measures the wall thickness of metallic (cast iron, steel and aluminum) and non-metallic (ceramics, plastics and glass) substrates and any other ultrasonic wave-conductor using ultrasonic technology. The measuring range of the thickness of LS211 is 0.8mm-600mm and ideal for measuring the effects of corrosion or erosion on tanks, pipes, or any structure where access is limited to one side.

Application

In many industries, It is essential to mesure the wall thickness to confirm the condition of the material for the normal running of the items or structure safety. LS211 ultrasonic thickness meter can be widely used in testing the thickness of various accessories or metallic structure to check them whether to be repaired or changed such as ships, tanks, pipes or steel structure. The gauge is applicable for petroleum, chemical, metallurgical, shipbuilding, aviation and aerospace various fields.

Parameters

Features:

LS211 ultrasonic thickness gauge calculates the material thickness by sound velocity and the time taken between the emitted pulse and the detected echo, a precision timing chip can bring the user the accurate time to get the accurate data;

The gauge probe employs a double crystal transducer consisted of two independent crystals separated by an acoustic barrier. One crystal sends ultrasonic pulses, and another is responsible for receiving them. The probe is highly sensitive and can effectively reduce clutter, and the probe housing is made of stainless steel, which is hard and durable;

Some materials are good conductors of sound and some are not. For the latter, the meter can switch the Gain freely which is to amplify the ultrasonic signal so that the emitted pulse is accurately captured by the transducer as it propagates, and obtains accurate data;

LS211 ultrasonic thickness tester features two measurement mode: QC mode and statistics mode
Allowing to set upper and lower limits to check the problem areas by prompting NG under the QC mode. It will count maximum, minimum and average values of data in Statistics mode;

LS211 already contains the velocities of several common metallic (such as iron, copper, aluminum) and non-metallic materials (plastics, ceramics, plexiglass) as well as other objects and the user are not required to find them separately;

The tester can reverse the sound velocity of the material based on the known thickness and measurement results. And the instrument can test irregular materials of the same components as the materail whose thickness can be measured;

With a wide mesuring range of material, the LS211 can detect materials from as thin as 0.8 mm to 600 mm. Its resolution can reach to 0.001mm when measuring the objects 0.8mm-10mm;

As a non-destructive testing tool, LS211 ultrasonic thickness gauge uses dual-crystal transducer and a little amount of ultrasonic couplant to assist in detecting the thickness of substrates, able to measure the thickness of most materials, such as steel, plastics, glass, ceramics and so on;