1 9

ETCR6200 AC/DC Leakage Current Clamp Meter Current Meter High Accuracy Car Leakage Current Clamp Meter Measurement 0-60A

ETCR6200 AC/DC Leakage Current Clamp Meter Current Meter High Accuracy Car Leakage Current Clamp Meter Measurement 0-60A

$148.00 USD
$148.00 USD
Promoção Esgotado
ETCR6200 AC/DC Leakage Current Clamp Meter also named: Car Leakage Current Clamp Meter, Car Standby Current Clamp Meter, Car Inrush Current Tester, Car Charge Current Tester. It is specially designed for online measurement of DC, AC leakage current, current below 600V by adopting up-to-date CT technology and digital integration technology. It is specially suitable for measure car standby current, leakage current, inrush current. It is a product with the characteristic of relatively small size, high accuracy, strong anti-interference capability and automatic shifting. It is apply to car leakage rapid detection, consumed current detection, quickly find the fault of the wire broke leakage, equipment fled electric, line contact with iron, measuring the motor inrush current and alternator charging current etc. It could be widely use in those fields as car repair, car leave factory test, car parts test, the current detection in telecommunication room, electric power overhauling, meteorology, oil detection, etc.
 
It has those functions as peak holding, data holding and data storage. It obtains one RS232 interface, communication cable and software, through the computer, it can online real-time monitoring, historical query, dynamic display, MIN-AVG-MAX indication, alarm setting and indicating, data reading, saving and printing.
 
Range and Accuracy
Function Measure Range Accuracy Resolution
DC current 0.0mA~60.00A DC ±2%rdg±5dgt 1mA
AC current 0.0mA~60.00A DC ±2%rdg±5dgt 1mA
General Specification
Model ETCR6200
Function

Measurement of AC/DC current, leakage current,

 repairing the car circuit.
Power Supply

Zn-Mn dry battery, 6F22, 9V(not included), 

continuous use for 30h
Test Mode Clip-on CT, noncontact measurement
Clamp Size 25mm×35mm
Measurement Range 0mA~60.0A  AC/DC
Resolution 1mA  AC/DC
Accuracy ±2%rdg±5dgt (23°C±5°C, below 75%rh)
Display Mode Four digits LCD display
Dimension LWH: 168mm×65mm×34mm
LCD Dimension 35mm×21.5mm; display domain: 32mm×15mm
Sampling Rate 2 times/s
Frequency AC: 45Hz-400Hz
Polarity Indication DC current auto identified and display“—”
Test Position Tested wire in the jaw center
Range Shift Automatically
Line Voltage Do not exceed AC 600V
RS232 Interface

Data stored in the memory of the meter 

via RS232 upload to PC
Com-Configure

Baud rate:9600, data bit:8, stop bit:1, 

check bit: NONE
Data Memory 99units, FULL blinks when the memory is full
Reading Hold DH indicating the reading is hold
Out of Range OL indicating the current is out of range
Auto Power-off

5 minutes after power on, 

it will power off automatically to lower the power consumption
Battery Voltage

Indicating the battery voltage is lower than 7.2V.

Then the battery has to be changed.
Weight 180g (including the battery)
Working Current Max 20mA
Humiture -10°C-50°C, below 80%rh
Limit Temperature Error -10°C-0°C and 40°C-50°C, within 2%rdg
Humiture Storage -10°C-60°C,below 70%rh
Insulating Strength AC 3700V/rms. (between the alloy of the clamp and the housing)
Applicable safety rules IEC1010-1, IEC1010-2-032, pollution:2, CAT III (600V)
Accessories

Meter: 1pc; 

toolkit: 1pc; 

RS232 communication line: 1pc;

disk: 1pc;

case: 1pc.

 

Mina

Ver informações completas